Guide
How to print a tattoo stencil at its actual size
Short answer: set the stencil's real width or height, print at 100% / Actual size with every “fit to page” option off, then measure a printed ruler. If the ruler is right, the stencil is right.
Checklist
- Size the design, not the page. Agree the width or height on skin (for example 4 in or 10 cm) and keep the aspect ratio locked.
- Pick the paper you have loaded. Letter (8.5 × 11 in) or A4 (21 × 29.7 cm). Landscape can fit a wide piece on one sheet.
- Turn scaling off. In the print dialog choose 100% or Actual size. “Fit to page”, “Scale to fit” and “Shrink oversized pages” all change the size.
- Measure the ruler. Lay a real ruler on the printed calibration mark. If 1 in or 2 cm measures true, the stencil does too.
- Tile big pieces. Back pieces and sleeves rarely fit one sheet. Print tiles with a small overlap, trim along the crop marks, align and tape.
Sample PDF: check your printer before a real stencil
Download a real stencil exported by the Stencira PDF renderer. The artwork is 100 mm wide; the corner crop marks sit exactly on its edges, so the distance between the left and right marks is a 100 mm reference line. The footer has a ruler with millimetre or ⅛ inch ticks.
- Sample stencil PDF, A4 (84 KB, 2 cm ruler)
- Sample stencil PDF, US Letter (84 KB, 1 in ruler)
Verified in the automated tests: the rasterised PDF measures 100 mm ± 0.3 mm between the crop marks (engine f8f6918). Your printer's result is what counts, so measure it.
The same PDF with different print settings
| Print dialog setting | Crop marks measure | Use it? |
|---|---|---|
| 100% / Actual size, fit to page off | 100 mm | Yes |
| Fit to page / Scale to fit (A4 PDF on Letter paper) | about 94 mm (Letter is shorter than A4, so the page is shrunk to fit) | No |
| Shrink oversized pages, on a printer with wide unprintable margins | slightly under 100 mm, depending on the printer | No |
| Custom scale, e.g. 120% to enlarge | 120 mm, and the ruler grows too | No: change the stencil size in the app instead |
The fit-to-page figure is the height ratio of US Letter to A4 (279.4 ÷ 297 ≈ 0.94). If the 2 cm ruler measures 2 cm, the stencil is at its true size.
Common problems
Why does my stencil print smaller than I set it?
The print dialog is scaling it. Choose 100% or Actual size and turn off Fit to page, Scale to fit or Shrink oversized pages, then print again and measure the ruler.
Letter or A4?
Use the paper loaded in your printer. The physical stencil size does not change between Letter and A4; only how much fits on one sheet does.
How do I print a stencil bigger than one sheet?
Tile it: split the design across several sheets that overlap slightly, trim along the crop marks, align the overlap guides and tape the sheets together before transfer.
Back to the tattoo stencil maker, see before and after examples or read how to make a tattoo stencil.